Page 3 - MENDERES KATALOG - ENG

Top Fuse ture measuring papers should logue indicators might have tem-
be used; those heat sensitive pa-
perature reading tolerances be-
pers should be placed between tween +-15 C. In such cases; the
APPLICATIONS the cloth and the fusible interlin- thermometer might close the
AND GENERAL ing while they are going into the circuit at 135 degrees Celsius,
SUGGESTIONS press. Temperature is measured whereas it ought to do so at 150
by the darkening rate of the heat degrees Celsius, and may mislead
indicators on the paper. If this the operator.
process is applied to the right and •There should not be any corro-
left wings of the press at the same sion allowed on the press cylin-
time, it allows observing whether ders, and the cylindrical pressure
heat differences occur between should be equally balanced on
wings, or not. left, right and middle parts.
•The cylinders should be checked
PRESS PROPERTIES frequently, the silicone covered
During the application, the coat cylinders must be changed regu-
on the fusible interlining is liquid- •To keep the quality at standards, larly and the hardness of the sili-
ized by using heat, and the trans- the maintenance of the press cone should be controlled contin-
fer of this liquid onto the cloth at should be made regularly and on uously.
necessary amount is established time. •The operators should be experi-
by the pressure. At the end of this •It should be used in an environ- enced.
process, by the cooling and the ment which is isolated from the •For the presses operating with
solidification of the coat, perfect flow of yarn and fibre, and humid- single personnel; as the blankets
fusing of the cloth and the fusi- ity. may erode unequally, the person-
bleinterlining is established. •It should have the structure and nel should work in rotation.
In the application of fusible inter- properties that are matching with •Products that come out of the
lining adhesion, the safest way is the purpose. press should not be handled be-
to use a press machine. The qual- •The heat and pressure values fore they are cooled, and in case
ity and the well-kept state of the should be homogenous on the of necessity for handling hot, ap-
press is one of the most impor- surface of the press blanket. propriate care should be given.
tant factors that directly affect the •The similarity of the parameter Otherwise, finger marks and loos-
final quality of the shirt. Although indicators (pressure and heat) en strength occurs at the points of
the type of fusible interlining may and actual indicators should contact.
differ with regard to the cloth be checked frequently, in case •There should not be any deep
quality to be applied, there are of mismatching occasions, the scratches or patches on the blan-
some general criteria about the maintenance should be informed ket surface. If there are patches,
usage of the presses. Press tem- for the necessary fixing. care must be given to make the
perature should be around: •The parameter indicators should fusing of cloth and fusible inter-
• 160 degrees Celsius for fusi- be sensitive enough. Some ana- lining apart from this patchy area.
bleinterlining products that are
100 g/m or below,
2
• 170 degrees Celsius for fusible
interlining products that are be-
tween 100 g/m and 130g/m
2
2
• 175 degrees Celsius for fusible
interlining products that are 130
2
g/m or above. To control the sug-
gested temperature, tempera-